The MEEA Codes team took their talents to Cleveland, OH where they held the 7th Annual Midwest Building Energy Codes Conference from November 15 -16, 2016. This event was a success with two productive days of networking and discussion among a diverse group of building efficiency professionals in the Midwest (and some from the coasts). Building professionals were represented from Federal, State and Local Energy Offices, Federal National Laboratories, Consulting Agencies, Non-Profits, and Code Enforcement Agencies. MEEA invited experts from across the Midwest and Nation to discuss timely topics related to building energy code adoption, compliance and enforcement – these are described below.
Commercial Energy Codes 101
Conference attendees enjoyed a breakfast of champions by learning about the Model Commercial Energy Code (ASHRAE 90.1-2013) to start the conference. Although this presentation was extra credit for those early risers, attendees were in their seats, eager to gain a better understanding of the Commercial Energy Code.
Introduction to Building Energy Codes
To “officially” start the day, Isaac Elnecave welcomed everyone to the conference and discussed the purpose of the Codes Conference. This was also a time to recap energy code successes in various states in the Midwest. A MEEA recap sheet can be found in the link below.
Panel 1: Multifamily Energy Efficiency and Codes
Multifamily buildings tend to be the odd building out when it comes to energy codes. This panel discussed the unique difficulties multifamily buildings face in terms of air leakage testing and lays out a rationale for developing a single energy code for multifamily buildings, instead of splitting them between the Residential and Commercial chapters in the IECC.
Frank Spevak, The Energy Conservatory
Jim Edelson, New Buildings Institute
Panel 2: Multifamily Compliance Code Official Forum
Given that multifamily buildings are split between two chapters in the IECC and certain code requirements are difficult to meet, there are often buildings that fail to comply with the energy code. During this panel, local code officials discuss common compliance issues they uncover when inspecting multifamily buildings in the field. Alison Lindburg from MEEA takes the following code officials through a series of pointed questions and the audience works together to discuss possible solutions.
- Richard Burton, Building and Safety Department, City of Lincoln, NE
- Emily Hoffman, NYC Department of Buildings, NYC, NY
- Tim Manz, Building Inspection Department, City of Blaine, MN
- Tom Vanover, Building and Housing, City of Cleveland
Panel 3: Making Multifamily High Performance
It is often said that building affordable multifamily projects with energy efficient features that go above the Model Energy Code is impossible due to funding constraints. However, the speaker in this panel put that myth to rest with several examples of how his firm is bringing Net-Zero (buildings that produce more energy than they consume) to affordable multifamily buildings. Tim McDonald understands that, in order for a building to truly be affordable, one must consider the cost of construction and long-term energy costs to the renter.
- The PFHA Project – A National Net-Zero Energy-Capable Affordable Housing Initiative
Tim McDonald, Onion Flats
Panel 4: 2018 IECC Development Process
Over the past year, building efficiency stakeholders recommended changes to the 2018 IECC and met twice to hash out these proposals during the development process. The IECC is updated every three years and the final vote on this update took place at the beginning of November. This presentation discussed how the code is developed and what changes might be included once the 2018 IECC is finalized.
Eric Makela, Cadmus Group
Panel 5: Water Efficiency in the Code
Although water use is not regulated in the Model Energy Code, these presenters talk about the potential to save energy when water use is reduced in buildings. These speakers recommend two different approaches to reduce water use in buildings, one is through added language in the energy code and the other is by using a water modeling program called the Water Efficiency Rating Score (WERS).
Karen Hobbs, National Resources Defense Council
Mike Collignon, Green Builder ® Coalition
Panel 6: Lighting up the Commercial Code
Day one finished with an in-depth discussion on the often mysterious lighting portion in the Model Commercial Energy Code. Learn about some of the energy considerations lighting designers make on a daily basis with this presentation.
Eric Richman, Pacific Northwest National Laboratory
Energy Codes Conference Recap: Day 2
Panel 1: Ventilation
The residential chapter in the Model Energy Code requires that buildings meet and are verified to have a certain level of air leakage As builders begin to push the envelope (pun intended) and buildings become tighter, the type and rate of mechanical ventilation becomes a hot topic of discussion. This presenter outlines the various types of mechanical ventilation and displays best practices for tight and efficient homes.
Patrick Huelman, University of Minnesota Extension
Panel 2: Commercial Compliance Studies
Compliance studies are an effective approach to understanding how buildings are being constructed and outline the aspects of the energy code that engineers, designer’s, and builders could use additional training. During this panel we heard from three speakers on different ways to develop and implement a commercial compliance study in the field.
Poppy Storm, Ecotope, Inc.
Russ Landry, Center for Energy and Environment
David Cohan, Department of Energy
Panel 3: Testing Commercial Buildings
Although conducting a blower door test is not a requirement in the Commercial Model Energy Code, this is a clear path to achieve deeper energy savings in all building types. In this panel we hear about the recent adoption of the 2015 IECC in NYC which includes an amendment to require blower door tests on certain commercial building types.
Emily Hoffman, NYC Buildings Department
Panel 4: Getting to a Zero Energy Ready Code
This panel brought in energy code experts to discuss how to achieve more robust energy codes in jurisdictions and states throughout the nation. With the development of stretch codes, these areas have become efficiency leaders with the adoption of codes that go above the Model Energy Code. Our speakers and attendees discussed the potential for this energy code mechanism to eventually move the Model Energy Code from its current level to a zero energy code.
Alison Lindburg, Midwest Energy Efficiency Alliance
Cathy Chappell, TRC Energy Services
Jim Edelson, New Buildings Institute
A big thanks to all our Super Energy Code professionals for making this Codes Conference another success – we couldn’t have done it without you!